What happened at the AMA Expo 2015?

What happened at the AMA Expo 2015?

IMG_1097

Introduction

I’ve been a card carrying member of the Academy of Model Aeronautics (AMA) for over a decade, when my first plane was a 2-channel (Motor Off-On and a Rudder) toy with a turning radius of Texas from a hobby store. Today that humble start has grown into a whole collection of Warbirds, 3D planes, EDF jets, Helicopters and of course the Multirotors. I’ve always meant to go to the AMA Expo http://amaexpo.com/ held every year in Ontario in South California, but for one reason or another I never quite made it. This year given the influx of “drones”, I wondered how the AMA and the AMA Expo was coping with this change. Luckily I managed to get a Media Pass as I was covering the AMA Expo for RC Flight Camera Action Magazine in the UK (also thanks to AMA for sorting the pass out for me.) So this post is going to be a bit different, as I realized that I had a lot of photographs. So instead I’m going to let the photographs do the talking, interspersed with commentary from myself.

IMG_1053

The Expo was spread over a number of days, Thursday 8th to Sunday 11th January. I attended Saturday the 10th, when the AMA General Meeting was held, with a large crowd. in attendance.  The speaker line-up was impressive http://amaexpo.com/speaker-series/ as well as the event schedule http://amaexpo.com/attractions/schedule-of-events/

DSC_0195

Swap Meet

As the crowd was queuing out of the door for the main hall I headed off to look at the Estate Sale and Swap Meet. There where 3 rooms set aside outside the main hall, and they were extremely busy. This was the place to find that bargain.

DSC_0197 IMG_1058 IMG_1064 IMG_1065

Main Hall and Vendors

After the swap meet I headed over to the Main Hall now that the crowd had died down. As you entered the Ontario Convention Center you could tell that the AMA had done a great job of bringing a lot of vendors together, to display a whole range of diverse products and services.

 IMG_1096 IMG_1095 IMG_1099 IMG_1101

Static Display

First off the Static Display. Even given the abundance of ARF’s and RTF’s, the scratch and kit building is going strong. That’s not to say ARF and RTF are bad, the quality compared to 6 or 7 years ago is great and has got a lot more people into RC flying. But nothing is quite as beautiful as a scratch built model. You just know the hours and patience in building these models.

IMG_1067 IMG_1068 IMG_1069 IMG_1070 IMG_1080 IMG_1083 IMG_1084 IMG_1085  IMG_1092 IMG_1075

My personal favorite was the P51 Mustang, it was amazing, the pictures don’t do it or any of the planes justice. Continuing on the plane theme, there was quite a selection of fixed wing vendors.

Fixed Wing

Horizon Hobby, Hobbico, Precision Aerobatics, SebArt (love those planes) and of course Ritewing (FPV and Mapping fixed wing masters with their Z2, Z3 and new under development Drak.) The Habu and Slick where particular tempting.

B7U5jxwCIAA6mn_ IMG_1221 IMG_1217  IMG_1206 IMG_1196 IMG_1195 IMG_1153 DSC_0279 DSC_0266

Helicopters

So not to be left out and and not to be outshone by the “drone” syndrome, Helicopters were out in force. Nice to see Align TREX still going strong as well as Forza and Blades.

IMG_1218  DSC_0288 DSC_0290 DSC_0291 DSC_0292 IMG_1193

Multirotors

So now we come to the Multirotors. So were there many at the AMA Expo? Well the answer to that is a big fat definite YES. Juts like at CES 2015, I can happily say 2015 is definitely the year of the “drone” Interesting enough the multirotor market has now fractured into more specialized niches. These can be broken down into hobbyist, amateur viedo and photogrpahy, professional video and photography, aerobatic/flipping inverted and finally FPV racers. So here’s a look at some of the multirotors in each category.

Hobbyist Multirotors

There was quite a selection of hobbyist multirotors, with Horizon Hobby, Hobbico having full ranges from the miniature up to the 200 size class. These copters are great for an introduction to flying and has become one of the fastest growing segments in the RC hobbyist field. In fact I believe this growth in hobbyist multirotors has lead to the AMA hitting a new membership record. I must say I congratulate the AMA for reaching out to multirotor enthusiasts, and helping educate them with such programs as “Know before you Fly” http://knowbeforeyoufly.org/  I also congratulate the manufacturers who are adding more functionality and safety features such as Horizon Hobby SAFE technology.

IMG_1199  IMG_1192 IMG_1189DSC_0246

Amateur Video and Photography

The trend with manufacturers appears to be designing drones with gimbals and either a GoPro camera mount or their own proprietary cameras. This year appears to be the year that video downlinks and FPV for amateurs is really getting traction. Here you see the Roswell Flight Crew checking out a AP multirotor with a video downlink built into the controller. Also a very nice system from UAVX with control sticks for flight, a separate set gimbal sticks for the gimbal and a HD video downlink. It can also be paired with Google Glass, so you can see all the information and video downlink as your flying.

DSC_0269  DSC_0271DSC_0274 IMG_1134IMG_1131 IMG_1190

 IMG_1161 IMG_1163

Professional Video and Photography

Two multirotors stood out at the AMA Expo for professional use, everyone knows the DJI Inspire 1, however the other newcomer is the Align M690L, I’ll talk more about that later.

IMG_1116 IMG_1188

Aerobatic, Inverted and Flipping Multirotors

Yes areobatic flipping and inverted drones were popping up all over the place. Here is a demonstration from Invertex, pretty cool demo flight. http://youtu.be/2EqzaKSI-JM

IMG_1105 IMG_1106 IMG_1159 IMG_1160

FPV Racers

The FPV community was well represented by the likes of XHover, RC Depot and DroneProz. The last two photographs are of my first FPV Racer by RC Depot QAV250. It’s flying on an OpenPilot CC3D that is simple to connect, setup and flies amazingly well. Looking froward to spending more time flying it. I’ll keep you posted. DroneProz had a RTF package and they explain about it here http://youtu.be/pkl62Wrau_4

IMG_1187 IMG_1186 IMG_1122 DSC_0263 IMG_1211 IMG_1207 IMG_1214IMG_1215

That Drone Show

I believe by now most people know “That Drone Show” and David and Sarah Oneal, http://www.thatdroneshow.com/ who do an excellent job of interviewing a whole spectrum of personalities in the drone community. I met up with them at the AMA Expo, here you can see David doing his stuff with XHover, whilst later Sarah interviewed me http://youtu.be/tFCvENpsJVU They are also organizing International Drone Day and yes under their persuasive powers I’m the Captain of Team Santa Cruz. http://www.internationaldroneday.com/

IMG_1201 IMG_1224

Precision Hawk

Thanks to Lia Reich (Senior Director of Communications) of Precision Hawk http://www.precisionhawk.com who gave Tyler Collins (Director of Business Development) the heads up I was dropping past for a talk. As you know from my previous posts I am very involved in the UAV Precision Agriculture area, so it was good to meet up with Tyler and discuss Tyler’s experience’s and my own. As to be expected we had a lot in common, including it’s all about the data, the drone is just a platform for sensors, NDVI is useful but not the magic bullet people profess it to be. Overall it was a very enjoyable chat. Tyler also gave me a run down on their new LATAS sense and avoid technology which works over 2/3G cellular links. Whats very interesting is that Precision Hawk are rolling LATAS out as an open source product, which is a very insightful idea. The only way to critical mass and roll-out is to have a large number of people adopt a common strategy, and open source allows lots of different users to get involved and generate that critical mass.

IMG_1166  IMG_1168 IMG_1169 IMG_1203 IMG_1204 IMG_1202

Cases

GPC had a case for everyone as can be seen below. The new Align Canon D5 copter case, Iris+, Phantom and even FPV racer cases.

IMG_1213 IMG_1210 IMG_1208  IMG_1211

Flying Demos

Indoor flying areas were put to one side with a packed schedule, with Pro fliers wringing out the planes and helicopters, showing new designs and eye watering maneuvers.

IMG_1177 IMG_1180

Other Sights

Well there was a lot to see at the Expo, including tanks, helicopters, gliders, the Civil Air Patrol, even NASA and the Roswell Flight Test Crew!

DSC_0258 DSC_0286 DSC_0284 DSC_0296 DSC_0298 IMG_1133 IMG_1145 IMG_1144

Align Multirotors

Anyone who has flown helicopters knows of Align. A lot of pilots cut their teeth on the TREX 450 me included. Well Align has kept the helicopter brand going strong and has now branched out into the multirotor market with 4 new models http://www.align.com.tw/multicopter-en/. The Leap, M470( GoPro), the 800mm M480L (GH4) and the 900mm M690L (Canon 5D MIII). As is normal with Align, the cost is extremely competitive and the quality and support outstanding. Looking over the designs, you can see the well thought out details.

IMG_1112 DSC_0246   IMG_1174 IMG_1111 IMG_1173 IMG_1110 IMG_1172 IMG_1108

Multirotor of the Expo

So the standout of the AMA Expo for myself was the Align M690 http://www.align.com.tw/multicopter-en/m690l/ which costs $1799.99. You can add a 3D gimbal for a GH4 for $1299.99, and a 3D gimbal for a Canon D5 MIII for $1389.99. That is $3189.98 for a quality Canon 5D AP platform. That’s with Align quality and support. A copter of this quality at this price point is unheard of.

IMG_1108 IMG_1109 IMG_1116 IMG_1117 IMG_1115 IMG_1119

Conclusions

The AMA Expo pretty much lived up to my expectations with a diverse array of vendors and products. However yet again, all the evidence points towards that 2015 is the Year of the Drone.

Regards

@theUAVguy

http://www.twitter.com/theUAVguy

http://www.kextrel.com